Dewalt Dws7085: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

DeWalt DWS7085 Information

The DeWalt DWS7085 is a 10-inch miter saw that features a built-in LED work light system. The work light casts a shadow of the saw blade onto the work surface, which provides a precise guide for making accurate cuts. The work light is powered by a separate power supply, so it can be used even when the saw is not running.

The DWS7085 has a 15-amp motor that delivers up to 3,800 no-load revolutions per minute. This makes it capable of cutting through a variety of materials, including lumber, plywood, and metal. The saw also features a bevel range of 45 degrees to the left and right, and a miter range of 0 to 52 degrees to the left and right.

The DWS7085 is made with a durable cast aluminum base and an upper guard. The base has a built-in dust collection port to help keep your work area clean. The upper guard has a clear plastic window that allows you to see the work surface clearly while you are cutting.

The DWS7085 comes with a carbide blade, a blade wrench, and a user manual. It is backed by a 3-year limited warranty from DeWalt.

Full specifications

Feature	Specification
Motor	15 amps
Blade size	10 inches
No-load RPM	3,800
Bevel range	45 degrees to the left and right
Miter range	0 to 52 degrees to the left and right
Dust collection port	Yes
Upper guard with clear plastic window	Yes
Weight	56 pounds
Dimensions	21 x 17 x 17 inches

Features

• Built-in LED work light system
• 15-amp motor
• 3,800 no-load RPM
• 45-degree bevel range
• 0 to 52-degree miter range
• Dust collection port
• Upper guard with clear plastic window
• 3-year limited warranty

What's in the box

• DeWalt DWS7085 miter saw
• Carbide blade
• Blade wrench
• User manual

DeWalt DWS7085 Compare with Similar Item

a table comparing the DeWalt DWS7085 to some similar items:

Feature	DeWalt DWS7085	Makita XSL07	Bosch GCM12SD
Cutting capacity	12 inches	12 inches	12 inches
Bevel range	48 degrees left/right	47 degrees left/right	47 degrees left/right
Plunge range	0-3/4 inches	0-3/4 inches	0-3/4 inches
Motor power	15 amps	15 amps	15 amps
Weight	35 pounds	36 pounds	36 pounds
Price	$400	$450	$450

As you can see, the DeWalt DWS7085 is very similar to the Makita XSL07 and Bosch GCM12SD. All three saws have a 12-inch cutting capacity, a 48-degree bevel range, and a 0-3/4-inch plunge range. They also have 15-amp motors and weigh around 35 pounds. The main difference between the three saws is the price. The DeWalt DWS7085 is the most affordable option, while the Bosch GCM12SD is the most expensive.

If you're looking for a high-quality 12-inch miter saw at a reasonable price, the DeWalt DWS7085 is a great option. It's comparable to the Makita XSL07 and Bosch GCM12SD, but it's slightly less expensive. If you're willing to spend a little more money, the Bosch GCM12SD is a great choice. It has a few extra features, such as a laser guide and a dust collection port, that the DeWalt DWS7085 doesn't have.

DeWalt DWS7085 Pros/Cons and My Thought

a 500-word summary of the DeWalt DWS7085 pros and cons, user reviews, and my thoughts:

DeWalt DWS7085 Pros:

• Powerful 15 amp motor delivers up to 4,000 RPM for fast cutting
• Compact and lightweight design makes it easy to transport and maneuver
• Laser guide provides accurate cuts
• Dust collection system helps keep your work area clean
• Built-in stand for hands-free operation
• Durable construction for long-lasting performance

DeWalt DWS7085 Cons:

• Some users have reported that the laser guide is not as accurate as they would like
• The dust collection system is not as effective as some other models
• The price is higher than some other miter saws on the market

User Reviews:

Overall, user reviews of the DeWalt DWS7085 are positive. Many users praise the saw's power, accuracy, and portability. Some users have also noted that the dust collection system is not as effective as they would like. However, overall, most users seem to be happy with their purchase.

My Thoughts:

The DeWalt DWS7085 is a powerful and accurate miter saw that is perfect for professional and DIY users alike. The saw's compact and lightweight design makes it easy to transport and maneuver, and the laser guide provides accurate cuts. The dust collection system is not as effective as some other models, but it is still sufficient for most users. Overall, the DeWalt DWS7085 is a great choice for anyone looking for a high-quality miter saw.

Here are some additional thoughts I have about the DeWalt DWS7085:

• The saw's powerful motor makes it easy to cut through even the thickest materials.
• The laser guide is very accurate and makes it easy to make precise cuts.
• The dust collection system is not the best, but it does a decent job of keeping your work area clean.
• The saw's compact and lightweight design makes it easy to store and transport.
• The saw is built to last and should provide years of reliable service.

Overall, I think the DeWalt DWS7085 is a great miter saw for the price. It is powerful, accurate, and portable. If you are looking for a high-quality miter saw, I would definitely recommend the DeWalt DWS7085.

DeWalt DWS7085 Problems and Solutions

The DeWalt DWS7085 is a 12-inch compound miter saw that is known for its accuracy and power. However, like any tool, it can experience some common problems. Here are a few of the most common issues and solutions, as reported by experts:

• The saw won't start. This is usually caused by a blown fuse or tripped circuit breaker. To check the fuse, look for a small, clear glass tube located near the saw's power cord. If the glass tube is blackened or blown out, replace the fuse. To check the circuit breaker, look for a small switch located in the electrical panel. If the switch is in the "off" position, flip it to the "on" position.
• The saw is making a loud noise. This could be caused by a number of things, including a loose blade, worn bearings, or a damaged motor. To check the blade, make sure it is properly tightened and aligned. To check the bearings, listen for any signs of grinding or knocking. If you hear any unusual noises, it's best to take the saw to a qualified technician for further diagnosis.
• The saw is not cutting straight. This could be caused by a number of things, including a misaligned blade, a bent arbor, or a damaged fence. To check the blade alignment, use a straightedge to make sure the blade is parallel to the fence. To check the arbor, look for any signs of bending or warping. If you suspect that the fence is damaged, replace it.
• The saw is not making accurate cuts. This could be caused by a number of things, including a worn blade, a misaligned laser, or a damaged scale. To check the blade, make sure it is sharp and properly aligned. To check the laser, make sure it is properly aligned and functioning. To check the scale, make sure it is not damaged or corroded.

If you experience any of these problems with your DeWalt DWS7085, consult the owner's manual for more detailed troubleshooting instructions. You can also contact DeWalt customer service for assistance.

Here are some additional tips to help you keep your DeWalt DWS7085 in good working order:

• Inspect the saw regularly for signs of wear and tear. This includes checking the blade, bearings, motor, and other components.
• Lubricate the saw according to the owner's manual. This will help to prevent wear and extend the life of the saw.
• Store the saw in a dry, cool place. This will help to prevent rust and corrosion.
• Transport the saw carefully. Avoid dropping or banging the saw, as this can damage the components.

By following these tips, you can help to ensure that your DeWalt DWS7085 miter saw provides you with years of reliable service.

DeWalt DWS7085 Manual

DeWalt DWS7085 Manual

Safety Information

• Read and understand all safety warnings and instructions before using this saw.
• Keep children and bystanders away from the work area.
• Always wear safety glasses, a dust mask, hearing protection, and gloves when using this saw.
• Make sure the saw is properly grounded before using it.
• Do not use the saw if it is damaged or malfunctioning.
• Always use the correct blade for the material you are cutting.
• Never cut metal or other materials that could cause sparks.
• Keep the saw area clean and free of debris.
• Disconnect the saw from the power source before making any adjustments or cleaning it.

Before Use

• Inspect the saw for any damage before using it.
• Make sure the saw is properly grounded.
• Attach the correct blade for the material you are cutting.
• Adjust the saw to the desired angle of cut.
• Make sure the workpiece is secure before cutting.
• Never cut more than one piece of material at a time.
• Always use a push stick to guide the workpiece through the saw.

Troubleshooting

• If the saw does not start, check the power cord and make sure it is plugged in properly.
• If the saw starts but does not cut, check the blade and make sure it is sharp and properly installed.
• If the saw is making strange noises, stop using it immediately and contact DeWalt customer service.

Maintenance

• Keep the saw clean and free of debris.
• Inspect the saw regularly for any signs of wear or damage.
• Replace any worn or damaged parts immediately.
• Lubricate the saw according to the manufacturer's instructions.

Warranty

This saw is warranted to the original purchaser for one year from the date of purchase against defects in material and workmanship. If this saw fails within the warranty period, DeWalt will repair or replace it free of charge.

Contact Information

DeWalt 701 East Joppa Road Towson, MD 21286 1-800-4-DEWALT (1-800-433-9258) www.dewalt.com

Additional Information

• For more information on this saw, please visit the DeWalt website or contact DeWalt customer service.
• This saw is intended for professional use only.
• Do not use this saw for any other purpose than what it is intended for.
• By using this saw, you agree to the terms and conditions of the warranty.